How To Clean Shower Doors With WD-40?

If you live in a home with tile or glass shower doors, they can get dirty over time. The good news is that you don’t have to spend hours scrubbing them down. Instead, try using a spray bottle filled with water mixed with some WD-40.

WD-40 has been around since the 1940s. Its name comes from its creator, William S. Durkee, who developed it for his wife. He wanted a cleaner house, so he created a non-sticky solution that would allow him to wipe away dirt without leaving streaks.

The product was originally sold as “Mr. Fix It” and became very popular among DIYers. Today, WD-40 remains one of the most trusted household products on the market.

Read more: WD-40 Specialist Rust Release Penetrant Spray Review

It works well on shower doors because it creates an invisible barrier between the surface and moisture. This helps prevent soap scum buildup and keeps your shower door looking fabulous.

You can use this method to clean any surface: bathroom mirrors, windows, car windshields, even your kitchen sink!

How To Clean Shower Doors With WD-40

You will need:

• A small spray bottle filled with water (a regular spray bottle works fine)

READ MORE:  How To Clean Curtains While Hanging?

• About 1/3 cup of WD-40

WD-40 is available in both 1-gallon liquid container and spray bottle form. You should be able to find either at your local hardware store. If you purchase a spray bottle, then no need t mix water with it.

Here is how to clean shower doors with WD-40:

Step 1: Spray the area thoroughly with the WD-40. Let it dry completely before moving on to the next step.

Step 2: Fill the spray bottle about halfway full with water. Add a few drops of WD-40 to the mixture. Shake the bottle vigorously until all of the WD-40 has dissolved into the water.

Step 3: Respray the entire area, focusing on the areas where you see dirt. You may want to do this several times if there are stubborn spots.

Step 4: Rinse off the surface with plain tap water. Repeat steps two through four if you still notice stubborn stains after rinsing.

Tip: Try spraying a little bit of WD-40 onto a paper towel first. Then rub the towel across the spot to make sure the WD-40 really does what it says it does.

Precaution: WD-40 contains petroleum distillates and should be used outdoors only. Keep out of reach of children and pets. Do not ingest. For external use only. Avoid contact with eyes. In case of accidental ingestion, seek medical attention immediately. Always read labels.

What are the common stains on shower doors?

Shower doors accumulate soap scum when people take long showers. They also collect mildew and mold. These are both signs that you need to clean your shower doors.

Also, water stains can appear on shower doors. When you use a lot of hot water, the heat causes minerals such as calcium carbonate to precipitate out of the water. As these minerals fall to the bottom of the tub or shower, they leave behind a white stain.

READ MORE:  How To Clean Night Guard At Home?

To remove mineral deposits, you can add baking soda or white vinegar to the water. Baking soda will help dissolve the minerals, while vinegar will break up the sediment.

If you find that your shower doors are covered with soap scum, you can remove it by cleaning the surface with a soft clean cloth dipped in warm water. Be careful not to scratch the surface.

If you find that your shower walls are stained, you can remove the stain by rubbing a damp sponge against the wall.

If you find mildew growing on your shower doors, you can kill it by wiping the surface with a bleach solution. Make sure to rinse the surface thoroughly afterward.


What should I look out for when cleaning my shower doors?

Look for signs of mold growth. Mold can be tough to remove, but it doesn’t last long once it starts growing. Once you find mold, you’ll know you’ve got a problem.

How often should I clean my shower doors?

It depends on the amount of soap residue and other contaminants. We recommend cleaning your shower doors at least twice per year.

What type of stains can WD-40 help me get rid of?

WD-40 can work on just any tough stains. Common examples include grease, oil, blood, rust, and mildew.

What types of commercial bottles do I need to buy?

You can buy WD-40 in any size bottle you want. However, we recommend buying one that holds at least 40 ounces (1L) because it has more capacity than smaller bottles. Also, consider buying a sprayer attachment, so you don’t have to open the bottle every time you want to apply WD-40.

Why does WD-40 smell like gasoline?

WD-40 is made from petroleum products. Petroleum products emit volatile organic compounds (VOCs). VOCs are chemicals that evaporate into the atmosphere. This is how they become odors. If you’re trying to eliminate smells around your home or office, make sure to first check if there are any sources of odor in your environment. Then, you can choose an area safe enough to spray WD-40 without causing harm.

READ MORE:  How To Clean A Steam Iron?

Is WD-40 safe for children?

Yes, WD-40 is rated for kids and pets. Just keep it away from their eyes and mouths.

Will WD-40 damage my shower doors?

No, WD-40 won’t harm your shower doors. In fact, we think it makes them shine better!

Can I use WD-40 to clean my refrigerator?

Sure! WD-40 is impressive stuff. Use it to clean everything from your fridge to your oven.

How much WD-40 do I need?

One ounce of WD-40 contains enough lubricant to coat up to 100 square feet. That means you only need a few drops to cover a large area like a bathroom floor.

Does WD-40 work on metal surfaces?

Yes! WD-40 is great for cleaning stainless steel, aluminum, copper, brass, and more.

Can I mix WD-40 with another product?

Yes! Mixing WD-40 with paint thinner or dishwashing liquid will create a stronger lube.

Do I have to rinse WD-40 off my shower doors after using it?

Yes. WD-40 is not intended to be used in place of soap and water.

How long does WD-40 stay effective?

WD-40 stays active for years, so you don’t need to worry about buying new bottles every time you clean your shower doors.

In Conclusion

WD-40 is an excellent cleaner that can help you eliminate sticky messes without damaging anything. It’s also very affordable, making it an excellent choice for anyone who wants to save money while keeping their home looking its best.

If you follow these simple instructions, you can easily clean your shower doors with WD- 40.