If you have a Dyson vacuum, you know that they are amazing machines. But, like any vacuum, they need to be cleaned regularly to maintain their suction power. Fortunately, cleaning the head of a Dyson vacuum is pretty easy and only takes a few minutes.
How to properly clean a Dyson DC59 head and fix one that’s not rotating (V6 and V7 too)
- Unplug the vacuum from the power outlet and remove the canister
- Twist off the dustbin lid and empty the contents into a trashcan
- Rinse out the dustbin with water and let it air dry
- Remove the HEPA filter and wash it with warm soapy water
- Let it air dry completely before putting it back in the vacuum
- Clean any visible dirt and debris from around the head of the vacuum with a damp cloth
How to Disassemble Dyson V8 Head?
If you need to disassemble your Dyson V8 head, follow these steps. First, remove the clear bin by pressing the release button and lifting it off. Next, unscrew the screws that hold the motor housing in place and remove it.
Inside the motor housing, you’ll find the brush bar assembly. To remove it, simply pull it out. Finally, unclip the soleplate from the bottom of the vacuum head and lift it off.
With a few simple steps, you can easily disassemble your Dyson V8 vacuum head!
How Do You Clean Dyson Heads?
Assuming you are referring to the vacuum head and not the air purifier:
To clean your Dyson vacuum head, first, remove it from the vacuum.
Second, using a soft brush (like an old toothbrush), scrub away any dirt or debris that is stuck in the bristles.
Third, use a can of compressed air to blow away any remaining dirt particles.
Finally, reattach the head to your vacuum, and you’re good to go!
How Do You Clean Dyson Head Attachments?
When it comes to cleaning your Dyson head attachments, there are a few things you need to keep in mind. First and foremost, you want to make sure that you unplug the vacuum before starting to clean any of the attachments. This is important for two reasons: safety and preventing damage.
Once the vacuum is unplugged, you can start by removing the head attachment from the vacuum itself. Most Dyson head attachments can be cleaned with a simple rinse under warm water. If there is any dirt or debris stuck on the attachment, you can use a soft-bristled brush to gently scrub it away.
Be sure to rinse the attachment thoroughly after scrubbing before putting it back on the vacuum. Sometimes, you may need to use a mild soap or detergent if the dirt is particularly stubborn. Once your Dyson head attachment is clean, be sure to dry it off completely before attaching it back onto the vacuum.
Leaving even a small amount of moisture on the attachment can cause damage or rust over time. And that’s all there is to cleaning your Dyson head attachments!
Can You Soak the Head of a Dyson Vacuum?
If you’re wondering whether you can soak the head of your Dyson vacuum, the answer is yes! Soaking the head of your vacuum in water can help to remove any built-up dirt and debris that may be clogging the bristles or inner workings of the vacuum. To do this, simply fill a sink or basin with warm water and add a few drops of dish soap.
Submerge the vacuum head in the soapy water and let it soak for 30 minutes. After 30 minutes, use your hands to agitate the head of the vacuum underwater to loosen any remaining dirt. Finally, rinse the head thoroughly with clean water before letting it air dry completely.
How Do You Clean the Head on a Dyson Cordless Vacuum?
Assuming you are talking about the brush head and not the dustbin, here are some tips:
- Remove any hair or debris that is wrapped around the brush head by hand. Be very careful when doing this as the bristles on the brush head are very sharp.
- If there is a lot of build-up on the brush head, soak it in warm water with a mild detergent for 10 minutes.
- Use an old toothbrush (or something similar) to scrub away any remaining dirt and grime. Rinse thoroughly with clean water.
- Let the brush head air dry completely before reattaching it to your vacuum cleaner.
Taking the time to clean your Dyson vacuum’s head can lengthen the lifespan of your vacuum and keep it running smoothly. It’s easy to do and only takes a few minutes, so there’s no excuse not to!